In the first half of this year, China's small and medium-sized motor industry achieved a total industrial output value of 28.82 billion yuan, an increase of 22.8% year-on-year; The total output of the industry was 91.749 million KW, with an increase of 13.409 million KW, a year-on-year increase of 17.1%; The sales revenue was 28.63 billion yuan, with a year-on-year increase of 5.22 billion yuan, an increase of 22.3%; The profit was 1.67 billion yuan, a year-on-year increase of 12.1%
recently, the small and medium-sized motor branch of China Electrical Appliance Industry Association (hereinafter referred to as the small and medium-sized motor branch) released the statistics of the operation data of 69 motor manufacturing enterprises in the first half of this year it received
although China's economy maintained sustained high growth in the first half of the year, there were also adverse phenomena such as excess liquidity and increased inflationary pressure, which led to the adjustment of monetary policy. Since this year, the central bank has raised interest rates three times and raised the bank reserve ratio six times, curbing the overheated growth momentum, which has had a great impact on small and medium-sized enterprises. At the same time, the international financial crisis is still shrouded in shadow, many countries have frequent debt crises, and China's multi industry export pressure has increased. In this complex economic situation at home and abroad, China's small and medium-sized motor industry in the first half of the economic indicators are still red across the board
the output of all varieties increased at the same time, and the export rose against the trend.
a closer look at the statistical results of the small and medium-sized motor branch, "electromechanical business daily" originally found that fluorochemical industry could do so. It was found that while the total production increased by 302 silicate composite insulation coating, the output of different sub types of motors increased, and the growth rate of permanent magnet motors was the most obvious
according to statistics, in the first half of this year, the output of small AC motors in China was 43.129 million KW, an increase of 14.8% year-on-year. Among them, the output of permanent magnet motor was 913000 kW, with a year-on-year increase of 450000 kW, with a growth rate of 97.2%; The output of large and medium-sized AC motors was 35.821 million KW, with an increase of 5.574 million KW, an increase of 18.4% year-on-year; General alternator output was 8.35 million KW, an increase of 1.594 million KW, an increase of 23.6% year-on-year; The output of DC motors was 4.449 million KW, an increase of 690000 kW, an increase of 18.4% year-on-year
in terms of sales, permanent magnet motors also performed prominently. In the small and medium-sized motor industry (including motors and generators), the total sales revenue of motors was 19.23 billion yuan, an increase of 23.4% year-on-year, of which the permanent magnet motor revenue showed 710 million yuan. 2. The experimental machine should be kept clean, an increase of 300 million yuan year-on-year, an increase of 73.1%. The sales revenue of generators was 2.78 billion yuan, with a year-on-year increase of only 7.2%
this trend can also be seen from the growth of enterprise income. It is understood that 13 of the enterprises participating in the statistics are involved in the production of permanent magnet motors, and 12 of them have achieved revenue growth, accounting for 92.3%
while the production and sales volume increased, the small and medium-sized motor industry also realized the double growth of export sales and export revenue under the general trend of increasing export pressure and steady decline in other industries, showing a satisfactory performance
according to statistics, the export sales volume of small and medium-sized motors in China in the first half of the year was 11.675 million KW, an increase of 34% year-on-year; The income of export motor was about 2.24 billion yuan, an increase of 38.1%. Among the 38 export enterprises, 28 increased their sales, accounting for 73.7%
there are both ups and downs
but while the production and sales volume and export volume of the industry have increased significantly, some problems implied in the data can not help worrying
although the profit of small and medium-sized motor industry increased by 12.1% year-on-year in the first half of the year, it fell by 13.6 percentage points compared with the first quarter. In this regard, the small and medium-sized electrical machinery branch believes that due to the continuous appreciation of the RMB, the rising consumer price index, the tightening of national monetary policy, rising labor costs, rising raw material prices and other factors, the growth space of industry profits has shrunk, and lags behind the growth of industrial production and sales revenue indicators
in terms of production and sales volume, 56 of the 69 enterprises in this statistics increased production, accounting for 81.2% of the total number of enterprises; 11 enterprises reduced production, accounting for 15.9% of the total number of enterprises; The two companies were flat. The sales revenue of 58 enterprises increased, accounting for 84.1% of the total number of enterprises. Among them, the motor revenue of 56 enterprises increased, accounting for 81.2%, and the generator revenue of 9 enterprises increased, accounting for 52.9% of the 17 generator manufacturing enterprises in the industry
from the data, it seems that the overall operation of the industry is in good condition, and most enterprises have achieved increased production and sales. However, compared with the previous situation, experts from the small and medium-sized motor branch told that, in fact, the growth momentum of motor production and sales in the industry as a whole has slowed down. In addition, except for the continued rapid growth of individual generator enterprises, the production and sales of most generator manufacturing enterprises have decreased significantly year-on-year
according to its statistics, the comprehensive economic benefit index of the small and medium-sized motor industry in the first half of the year was 194.2, with a year-on-year decrease of 3.6 percentage points. The main indicators constituting the comprehensive index of industrial economic benefits, such as the contribution rate of total assets, the value maintenance and appreciation rate of assets, the cost profit rate and the product sales rate were 9.1%, 126.2%, 6.1% and 98.3% respectively, with a year-on-year decrease of 1.5, 14.2, 0.2 and 1.4 percentage points. The asset liability ratio was 63.5%, up 0.3 percentage points year-on-year
in addition, there are some unfavorable factors that affect the development of small and medium-sized motor industry that need to be paid attention to
first of all, affected by the national macro-control policies, enterprises have greater difficulties in financing loans, resulting in tight liquidity. Moreover, the delay of some investment and construction projects indirectly caused the rise of inventory of industrial enterprises and the high level of accounts receivable and payable. It is understood that in the first half of the year, the industry inventory increased by 45.9% year-on-year, the total amount of accounts receivable increased by 43% year-on-year, and the total amount of accounts payable increased by 43.8% year-on-year
secondly, in the case of financial difficulties, the rapid rise in raw material costs has also boosted the pressure of small and medium-sized motor enterprises. In the first half of the year, the prices of hot-rolled silicon steel sheet, cold-rolled silicon steel sheet, electromagnetic wire and carbon steel increased by 7.0%, 0.9%, 20.3% and 15.3% respectively year-on-year
enterprises should increase the sales market, strengthen the strength of capital withdrawal, and ensure to reduce capital risks. Experts from the small and medium-sized electrical machinery branch suggested that although the overall situation in the first half of the year was good, the economic operation situation was still very complex. Industrial enterprises should accelerate the adjustment of product structure and the transformation of development mode, increase the added value of products, and continuously improve their competitiveness
LINK
Copyright © 2011 JIN SHI